Rice Lake 420 Plus HMI Digital Weight Indicator Installation Manual - Manual (Page 24)

20 420 Plus Installation Manual
DSPRAT 250MS
500MS
750MS
1SEC
1.5SEC
2SEC
2.5SEC
3SEC
4SEC
6SEC
8SEC Display rate. Sets the update rate for displayed values. Values are in milliseconds (MS) or
seconds (SEC).
Level 3 submenus
Primary Units (PRIMAR Parameter)
DECPNT 888888
888880
8.88888
88.8888
888.888
8888.88
88888.8 Decimal point location. Specifies the location of the decimal point or dummy zeroes in the
primary unit display. Value should be consistent with local legal requirements.
DSPDIV 1D
2D
5D Display divisions. Selects the minimum division size for the primary units displayed weight.
UNITS LB
KG
OZ
TN
T
G
NONE Specifies primary units for displayed and printed weight. Values are: LB=pound;
KG=kilogram; OZ=ounce; TN=short ton; T=metric ton; G=gram
I
Note
ndicators sold outside North America are configured with KG for both
primary and secondary units.
Secondary Units (SECNDR Parameter)
DECPNT 88888.8
888888
888880
8.88888
88.8888
888.888
8888.88 Decimal point location. Determines the location of the decimal point or dummy zeros in the
secondary unit display.
DSPDIV 5D
1D
2D Display divisions. Selects the value of minimum division size of the displayed weight.
UNITS KG
OZ
TN
T
G
NONE
LB Specifies secondary units for displayed and printed weight. Values are: KG=kilogram;
OZ=ounce; TN=short ton; T=metric ton; G=gram; LB=pound.
MULT 0.453592
Enter other
choices via
keyboard Multiplier. Specifies the conversion factor by which the primary units are multiplied to obtain
the secondary units. The default is 0.453592, which is the conversion factor for changing
pounds to kilograms. See Section 7.6 on page 48 for a list of multipliers.
Note
Multipliers are pre-configured within the indicator. Manual entry is only
necessary when NONE is selected under UNITS.
To toggle between primary and secondary units, press the UNITS key.
FORMAT Menu
Parameter Choices Description
Table 3-3. Format Menu Parameters (Continued)