Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 1.0 - Manual (Page 29)

Counterpart User Manual - Configuration 23
3.6.2 SCALE 3 Submenu
Figure 3-7. Scale 3 Serial Menu
SCALE 3 Submenu
Parameter Choices Description
Format Submenu
PRIMRY UNITS
DECPNT
DSPDIV Allows you to set the primary units, decimal point format, and display divisions.
SEC KG
G
LB
OZ
OFF Allows you to set the secondary units.

Decimal point format and display divisions are selected automatically. Values are
kg=kilogram (default); g=gram; lb=pound; oz=ounce; and off.
If using the <cu> token and secondary or tertiary values are changed,
the stream tokens must be changed to match in order to stream
secondary or tertiary.
TER OFF
KG
G
LB
OZ Allows you to set the tertiary units.

Decimal point format and display divisions are selected automatically. Values are off
(default); kg=kilogram; g=gram; lb=pound; oz=ounce.
If using the <cu> token and secondary or tertiary values are changed,
the stream tokens must be changed to match in order to stream
secondary or tertiary.
Accum Submenu
Table 3-6. Scale Three Submenu Parameters
FEATUR ETHERNET PFORMT SERIAL DIGI/O
XXXXXXX ID DISPLAY TEST SETUP AUDIT CALIBR
SCALES
FORMAT ACCUM
OFF
ON
SEC
UNITS DECPNT DSPDIV
TER PRIMRY
LB/OZ *
LB
G
OZ
KG
LB/OZ *
KG
OZ
G
LB
G
OFF
KG
LB
OZ
8888800 1D
5D
2D 8888880
8888888
8.888888
88.88888
888.8888
8888.888
OFF
CONFIG
VERS
SCALE 1 SCALE 2 SCALE 3
OFF
Scale Parameter Levels
Level 1
Level 2
Level 3
**Scale 3 sub-menu appears only when
serial port 1 is set to SCALE or IND.
88888.88
888888.8
Note
Note