Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 1.0 - Manual (Page 33)

Counterpart User Manual - Configuration 27
DISPMODE Count
Weigh
Unit Weight Display mode. This chooses the value to be displayed as large in viewing window.
Level 4 submenus - under the Level 3 Region Feature
REGULA NTEP
CANADA
INDUST
NONE
OIML Regulatory mode. Specifies the regulatory agency having jurisdiction over the scale site.
The value specified for REGULA affects the function of the front panel TARE and
ZERO keys.
• OIML, NTEP, and CANADA modes allow a tare to be acquired at any weight greater
than zero. NONE allows tares to be acquired at any weight value.
• OIML, NTEP, and CANADA modes allow a tare to be cleared only if the gross weight
is at no load. NONE allows tares to be cleared at any weight value.
• NTEP and OIML modes allow a new tare to be acquired even if a tare is already
present. In CANADA mode, the previous tare must be cleared before a new tare can
be acquired.
• NONE, NTEP and CANADA modes allow the scale to be zeroed in either gross or net
mode as long as the current weight is within the specified ZRANGE. In OIML mode,
the scale must be in gross mode before it can be zeroed; pressing the ZERO key in
net mode clears the tare.
• INDUST provides a set of subparameters to allow customization of tare, clear, and
print functions in non-legal-for-trade scale installations.
REGWOR GROSS
BRUTTO Sets the term printed when weighing in gross mode. Selecting BRUTTO replaces Gross with
Brutto.
DECFMT DOT
COMMA Specifies whether decimal numbers are displayed using a period (DOT) or a comma.
TIME TFORMT
T SEP Allows you to set the current time, and the time format and separator character.
DATE DFORMT
D SEP Allows you to set the current date, and date format and date separator character.
Level 4 submenus - under the Level 3 Consec # Feature
CURVAL 0 This is the starting number.
RESVAL 0 This is the ending/reset value.
Level 4 submenus - under the Level 3 Password Feature
CALIBR 0 Can enter a numeric password for each of the parameters listed.
SETUP
TEST
T & D
ID
Level 4 submenus - under the Level 3 Softkeys Feature
FEATUR Menu
Parameter Choices Description
Table 3-7. FEATUR Submenu Parameters (Continued)
Note