Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 1.0 - Manual (Page 38)

32 Counterpart User Manual
SETUP Menu
Parameter Choices Description
Level 2 submenus
SCALE See Section 3.6.1 on page 18 Configure scale settings. See the level 3 submenus of Table 3-5 on page 20 for
parameter descriptions.
FEATURE See Section 3.6.3 on page 24 Set counting options, region settings, view Unit ID, and set consecutive
numbering. See level 3 submenus of Table 3-7 on page 25 for parameter
descriptions.
SERIAL PORT 1
PORT 2
PORT 3 (Option Card) Configure communications ports. See level 3 submenus below for parameter
descriptions.
ETHERNET
CURRENTLY
WORKS
WITH
WEIGHVAULT .
EXPANDED
CAPABILITIES
COMING
SOON.
DHCP
IPADDRES
NETMASK
DFLTGTWY
DNSPRI
DNSSEC
COUNTERPART
PORT
REMOTEIP
REMOTEPT
MAC
VAULT DHCP = on/off for static
IP ADDRES = Address leased or statically set
NET MASK = sub net address
DFLTGTWY = default gateway
DNSPRI = primary domain server IP number
DNSSEC = secondary domain server IP number
LCLHSTNM = local host name
PORT = port number used
REMOTE IP = remote IP number using Weighvault
REMOTE PT = remote port number using Weighvault
MAC = views the MAC address and is non-changeable
VAULT = on or off
PFORMT GFMT
NFMT
CFMT
PALFMT
ACCFMT
TOTALFMT
HDRFMT1
HDRFMT 2 Sets the print format for gross weight, net weight, count, pallet, accumulate,
total, header 1 and header 2.
DIG IO
COMING
SOON DIO 1
DIO 2
DIO 3
DIO 4 Assign digital input/output functions.
VERS SOFTWR
REG Displays the software version.

Displays the regulatory version.
Level 3 submenus - Under the Level 2 Serial Feature
PORT 1
PORT 2
PORT 3 CMD
SCANNER
BAUD
BITS
STOPS BITS
TERMIN
HEADERS
EOLDLY
SFMT Specifies Port 1 through 3’s mechanism for triggering a transmission of data, print
message, baud rate, bits, stop bits, termination character, end-of-line delay, and
echo. see level 4 submenu for parameter descriptions.
Level 3 submenus - Under the Level 2 Ethernet Feature
VAULT OFF
ON BOARD
EXTERNAL Selets on or off
Using on board RJ45 Ethernet connections
Using wireless port connections
Table 3-9. Serial, PFORMT, DIG I/O, VERS submenu parameters