3 using revolution, Using, Print formatting grid – Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 1.0 User Manual
Page 68: Revolution, Figure 7-2. revolution print format grid, 62 counterpart user manual
62
Counterpart User Manual
Figure 7-1. PFORMT Menu, Showing Alphanumeric Character Entry Procedure
7.2.3
Using Revolution
®
The
Revolution
configuration utility provides a print formatting grid with a tool bar. The grid allows you to
construct the print format without the formatting commands (<NL> and <SP>) required by the front panel or
EDP command methods. Using
Revolution
, you can type text directly into the grid, then select weight value
fields from the tool bar and place them where you want them to appear on the printed ticket.
Figure 7-2 shows an example of the
Revolution
print formatting grid.
Figure 7-2.
Revolution Print Format Grid
Same as GFMT
SCALES
FEATURE
SERIAL
PFORMT
VERS
DIGIO
GFMT
NFMT
CFMT
Display first 6
characters of format
Scroll left in formatting string
Press INSERT to enter a space
before the active character
Press CLR to delete the character to the left
Scroll right in formatting string
NOTE:
To change the active character,
use the alpha keypad to enter the new
value.
PALFMT
ACCFMT
H1
H2
XXXXXXX
ID
ACCUM
DISPLAY
TEST
SETUP
AUDIT
CALIBR
CONFIG
Press to cycle the active character to the previous character
Press to cycle the active character to the next character
ETHERNET
VERS
TOTALFMT