2 keypad lock, 3 id commands, 4 eth commands – Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 1.0 User Manual
Page 58: Keypad lock, Id commands, Eth commands, Up to 150 codes c an be entered under id commands
52
Counterpart User Manual
6.1.2
Keypad Lock
The user has the ability to lock or unlock the keypad.
The commands are listed in Table 6-2.
6.1.3
ID Commands
Up to 150 codes c an be entered under ID
commands.
Table 6-3. ID Commands
6.1.4
ETH Commands
ETH commands are parameter setting commands. The
commands listed in Table 6-4 can be used.
Command
Parameter
KEYLCK.NUMBER
Keys can be locked or
unlocked.
Default for all: Unlock
KEYLCK.PRINT
KEYLCK.TARE
KEYLCK.ZERO
KEYLCK.SAMPLE
KEYLCK.GROSSNET
KEYLCK.UNITWT
Table 6-2. Keypad Lock Commands
Command
Function
ID.CODE#n
(#n = ID Code number referenced)
ID.DESC#n
(#n = item description)
ID.LOCATION#n
(n = Item location))
ID.LOT#n
(#n = lot number)
ID.PARTNUMBER#n
(#n = part number) - Can enter up to
ID.QUANTITY#n
(#n = quantity)
ID.TARE#1
(weight value)
ID.UNITS#1
(weight value in pounds)
ID.UNITWEIGHT#1
(weight value)
Command
Parameter
ETH.DEFAULTGATEWAY
Sets IP address
0.0.0.0
ETH.DHCP
ON
ETH.DNSPRIMARY
0.0.0.0
ETH.DNSSECONDARY
0.0.0.0
ETH.IPADDRESS
192.168.0.1
ETH.LOCALHOSTNAME
COUNTERPART
ETH.MACADDRESS
00-00-00-00-00-00
ETH.NETMASK
0.0.0.0
ETH.PORT
10001
ETH.REMOTESERVERIP
0.0.0.0
ETH.REMOTESERVERPORT
5466
Table 6-4. Ethernet Parameters
ETH.WEIGHVAULT
OFF
Command
Parameter
Table 6-4. Ethernet Parameters