Rice Lake TradeRoute HL Series - Installation and Service Manual (Legal-for-Trade) - Manual (Page 12)

8 Trade Route Installation Manual
2.3 Attachment of Scale to Truck
1. Position the scale modules on the truck frame as described in the previous section.
2. Mark the location of the bolt holes to be drilled through the truck frame, and move the scale away.
3. Drill 7/8
" holes through the channel of the truck frame.
4. Reposition the scale, aligning the holes.
5. Insert shims (flat washers) between the truck frame and the scale (equal amount on both sides). Bolt the
scale to the truck frame using the 3/4 " x 2 1/2 " grade 8 bolts, 3/4 " nuts, and 3/4 " lock washers supplied.
6. Torque the 3/4 " bolts to between 90-110 ft-lb.
7. Remove shipping alignment bolts.
0RXQWLQJ%ROWV
7KURXJK)UDPH
6KLSSLQJ
$OLJQPHQW
%ROWV 6KLSSLQJ
$OLJQPHQW
%ROWV
7\SLFDO
0RXQWLQJ
%UDFNHW
7\SLFDO
0RXQWLQJ
%UDFNHW
&RQWDLQHU
)UDPHWR
5HVWLQ7KLV
$UHD
0RXQWLQJ%ROWV
7KURXJK)UDPH
RQ%RWK6LGHV
Figure 2-4. Attachment of Scale to Truck Frame