Rice Lake TradeRoute HL Series - Installation and Service Manual (Legal-for-Trade) - Manual (Page 27)

Scale Installation 23
When connections are complete, reinstall load cell connector on the A/D card and use two cable ties to secure the
load cell cable to the inside of the enclosure.
Table 2-2. A/D Card Pin Assignments
A/D Card
Connector Pin Function
1 +SIG
2 –SIG
3 +SENSE
4 –SENSE
5 +EXC
6 –EXC
• For six-wire load cell connections to connector J1, remove
jumpers JP1 and JP2.
• For six-wire load cell connections to connector J2 (dual A/
D cards), remove jumpers JP3 and JP4.