4 linkage disassembly and assembly, Wrench or socket 3/4, Hex allen wrench (ratchet preferred) 1/4 – Rice Lake TradeRoute HL Series - Installation and Service Manual (Legal-for-Trade) User Manual
Page 46: Wrench (required for hydraulics only) 5/8, Wrench (required for hydraulics only)
Advertising
42
Trade
Route Installation Manual
4.4
Linkage Disassembly and Assembly
8
7
5
9
20
16
15
11
10
12
13
19
17
5
6
12
4
18
14
1
2
3
21
22
22
23
5
7
8
1
2
3
Single Cell Assembly
Double Cell Assembly
Figure 4-6. Disassembly/Assembly Diagram
To perform service on any of the scale parts (load cell, bushings), the linkage assembly must be disassembled. The
following procedure must be followed when disassembling any linkage. See parts lists for item numbers.
Tools required:
7/16
"
wrench or socket
3/4
"
wrench or socket
3/4
"
hex allen wrench (ratchet preferred)
1/4
"
roll pin punch
Hammer
Large flat-head screwdriver
11/16
"
wrench (required for hydraulics only)
5/8
"
wrench (required for hydraulics only)
Advertising