Rice Lake TradeRoute HL Series - Installation and Service Manual (Legal-for-Trade) - Manual (Page 19)

Scale Installation 15
2.7 Lock Down Bolt Adjustment
The lockdown bolt is adjusted at the factory. However, to ensure proper lockdown of the container, check the
lockdown bolt height adjustment.
The lockdown bolt should be adjusted so that the hydraulic cylinder is extended minimum 1/8
" to maximum 
1/4 " when locked down (see Figure 2-13). The load cell should be loose in the lockdown position.
Lockdown Sleeve
Lockdown Bolt
and Jam Nut
Figure 2-14. Lockdown Adjustment