Rice Lake TradeRoute HL Series - Installation and Service Manual (Legal-for-Trade) - Manual (Page 14)

10 Trade Route Installation Manual
Figure 2-7 shows simple closed square tubing sections riding on the chassis rails that are bolted to the chassis with
flanges on each section. This method also provides full support of the body during transport mode when the scale is
seated.
Figure 2-7. Simple Closed Square Tubing Support
Figure 2-8 shows a technique for tipping body applications used for supporting a dump body subframe at the
scissor ram while the body is being tipped. The scale can be used to take weight readings only when the dump body
is down.
Figure 2-8. Tipping Body Applications
Note
Always verify the scale is properly seated when down by checking that the load cells are disengaged. To verify
this, jiggle each load cell slightly.