Rice Lake TradeRoute HL Series - Installation and Service Manual (Legal-for-Trade) - Manual (Page 17)

Scale Installation 13
2.5.2 Line Locks to Valve
The system must be plumbed to a hydraulic source (pump) on the truck through a valve, supplied by installer.
Hydraulic schematics of the
Trade Route
systems are shown in Figure 2-10 and Figure 2-11.
Cylinder
Oriface
Line Lock
Tees
Spool Valve
Pressure Relief Valve
To Pump
P T
Figure 2-11. Hydraulic Schematic for Three Cell Systems
Cylinder
Oriface
Line Lock
Tees
Spool Valve
Pressure Relief Valve
Crosses
P T
Figure 2-12. Hydraulic Schematic for Four Cell Systems