Webs-cm-2, webs-pa-1 and webs-pa-2, Configuration and operation manual – Talkaphone WEBS-PA-2IP Outdoor Area WEBS Paging Unit User Manual
Page 14
WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
Configuration and Operation Manual
Page 14 of 53
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.4. Network
4.4.1. IP Settings
The IP Settings page allows you to configure the IP settings and the hostname of the communications
module.
Login → Network → IP Settings
Figure 5 IP Settings
To set IP settings:
1.
Select DHCP
– Automatic Configuration OR Static IP - Manual Configuration.
2.
Enter network details IP Address, Subnet Mask, Default Gateway of your network for Static IP - Manual
Configuration.
3.
Enter DNS Server to resolve domain names.
4.
Enter Hostname. Use unique identifier for each device on the network.
5.
Click Apply to save settings.
1
2
3
5
4