Webs-cm-2, webs-pa-1 and webs-pa-2, Configuration and operation manual – Talkaphone WEBS-PA-2IP Outdoor Area WEBS Paging Unit User Manual

Page 48

Advertising
background image

WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2

Configuration and Operation Manual


Page 48 of 53

Copyright 2012 Talk-A-Phone Co.

• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.

All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.

++ 0- Disable, the VM play in loop
++ 1- Enable, the VM play in loop
++
++ VM1PlayToUserInLoop = 0 (Default value)
++
++ Note : Admin can similarly program values for VM #2 to VM #5
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

VM1PlayToUserInLoop = 0
VM2PlayToUserInLoop = 0
VM3PlayToUserInLoop = 0
VM4PlayToUserInLoop = 0
VM5PlayToUserInLoop = 0

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VMActionOnOutboundCallsAns
++
++ Description : The specified VM will be played to the guard, once the call
++ is being answered by the the guard.
++
++ Valid values : Disable 1 - 5
++ Disable - Diable the option of playing the VM
++ 1 - 5 Specifies the number of the VM which needs to be
++ played to the guard phone, when the call is being
++ answered by guard.
++
++ VMActionOnOutboundCallsAns = Disable (Default value)
++
++ Field name : VM1PlayToGuardOnRemoteKeyCode, VM1StopToGuardOnRemoteKeyCode
++
++ Description : The VM #1 will be played/stopped to the guard, once the
++ configured key is dialed by the the guard.
++
++ Valid values : Disable, Combination of 0-9,*,# with maximum of 4 characters
++ Disable - Disable the field
++ *12# - can be used to either start or stop VM #1 play to
++ guard when dialed from the remote side.
++
++ VM1PlayToGuardOnRemoteKeyCode = Disable (Default value)
++ VM1StopToGuardOnRemoteKeyCode = Disable (Default value)
++
++ Note : Admin can similarly program values for VM2 to VM5.
++ Avoid using the same keycode for start and stop of the same
++ VM.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

VMActionOnOutboundCallsAns = Disable
VM1PlayToGuardOnRemoteKeyCode = Disable
VM1StopToGuardOnRemoteKeyCode= Disable
VM2PlayToGuardOnRemoteKeyCode = Disable
VM2StopToGuardOnRemoteKeyCode= Disable
VM3PlayToGuardOnRemoteKeyCode = Disable
VM3StopToGuardOnRemoteKeyCode= Disable
VM4PlayToGuardOnRemoteKeyCode = Disable
VM4StopToGuardOnRemoteKeyCode= Disable

Advertising
This manual is related to the following products: