Webs-cm-2, webs-pa-1 and webs-pa-2, Configuration and operation manual – Talkaphone WEBS-PA-2IP Outdoor Area WEBS Paging Unit User Manual

Page 53

Advertising
background image

WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2

Configuration and Operation Manual

Page 53 of 53

Copyright 2012 Talk-A-Phone Co.

• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected]• www.talkaphone.com.

All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.

Appendix D: Network Port Requirements

The network for communications module Series communications modules should allow the following:

IPv4 enabled

Allow the following protocols:

o RTP

o HTTP/HTTPS

o SMTP

Routed network

DHCP Server (Optional)

Network elements:

Layer-2 Switch

WEBS Contact Server

Ports:

The following ports needs to be enabled on the communications module Series communications modules and
allowed across the firewall and routers in the network.

Service/Module

Port

Port Type

Mode

HTTP

80

TCP/UDP

Inbound

FTP

21

TCP

Inbound

SSH

22

TCP

Inbound

Paging

5000

UDP

Inbound

STUN

3478

UDP

Inbound/Outbound

WEBS Contact Port

3001

UDP

Inbound/Outbound

SMTP Server Port

25

TCP/UDP

Inbound/Outbound

Advertising
This manual is related to the following products: