Webs-cm-2, webs-pa-1 and webs-pa-2, Configuration and operation manual – Talkaphone WEBS-PA-2IP Outdoor Area WEBS Paging Unit User Manual

Page 19

Advertising
background image

WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2

Configuration and Operation Manual

Page 19 of 53

Copyright 2012 Talk-A-Phone Co.

• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected]• www.talkaphone.com.

All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.

Field

Description

Total outgoing call duration

Total duration of the successful outgoing calls (hh:mm:ss)
between call answer and call termination events.

Incoming Calls

Total incoming call requests

Total number of incoming call request from the remote side.

Total missed calls

Counts the missed calls (calls that are not answered).

Total failed calls

Counts the total number of failed calls (e.g., rejecting an incoming
call when an Emergency Call is in progress).

Total incoming call duration

Total duration (hh:mm:ss) of successful incoming calls between
call answer and call termination events.

Incoming Pages

Total incoming page requests

Count of total number of incoming page requests from a WEBS
Contact

®

Server.

Total unsuccessful pages

Count of unsuccessful page requests to the communications
module (e.g., rejecting a page request when an Emergency Call
is in progress and has a higher operation mode priority over
paging).

Total voice page time

Total duration (hh:mm:ss) of successful pages.

Call Logs Fields:

Field

Description

Date

mm:dd:yyyy hh:mm:ss

The starting time of a call event or a page event.

Type

Indicates whether the event was an incoming call, outgoing call,
or a page.

Status

Displays the status of the call/page (i.e. whether the call/page
was completed successfully or not).

Originator

The interface on the communications module which initiated the
call. The valid entries are:

Button #1/Button #2/Button #3/Button #4

AuxIn #1/AuxIn #2/AuxIn #3

Keypad

Remote

For paging, the Originator is always Remote.

Source URL

URL of the source of the call (maximum of 30 characters).

Destination URL

URL of the destination of the call (maximum of 30 characters).

Duration

hh:mm:ss

This indicates how long (in seconds) the call event or page event
lasted.

This field is only valid for successful calls/pages.

Voice Codec Used

The voice codec being used for a given call.
The valid entries are:

Advertising
This manual is related to the following products: