Webs-cm-2, webs-pa-1 and webs-pa-2, Configuration and operation manual – Talkaphone WEBS-PA-2IP Outdoor Area WEBS Paging Unit User Manual

Page 34

Advertising
background image

WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2

Configuration and Operation Manual


Page 34 of 53

Copyright 2012 Talk-A-Phone Co.

• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.

All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.

++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

JitterBuffer = 30

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : LineLevelOutputGain
++ Description : Line level output gain to be used during Recording or
++ Amplifying.
++ Valid values : 1 to 20, Default value is 16
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

LineLevelOutputGain = 16

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : Speaker
++ Description : Enable/disable Speaker state, applicable to both Handset
++ and Handsfree
++ Valid values : Speaker = 0 - Disabled
++ Speaker = 1 - Enabled (Default value)
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Speaker = 1

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : SpeakerGain
++ Description : Speaker gain, applicable to both Handset and Handsfree.
++ Valid values : 1 to 20, Default value is 12
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

SpeakerGain = 12

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : Mic
++ Description : Enable/disable Mic state, applicable to both Handset
++ and Handsfree
++ Valid values : Mic = 0 - Disabled
++ Mic = 1 - Enabled (Default value)
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Mic = 1

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : MicGain
++ Description : Mic gain, applicable to both Handset and Handsfree.
++ Valid values : 1 to 20, Default value is 12
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

MicGain = 12

Advertising
This manual is related to the following products: