Talkaphone WEBS-PA-2IP Outdoor Area WEBS Paging Unit - Manual (Page 16)

WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
Configuration and Operation Manual
Page 16 of 53
Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.6. Authentication
The Authentication page allows the administrator to change the user credentials used to access the
communications module through the Web interface or SSH.
Login → Authentication
Figure 22 Authentication
To configure the authentication details:
1. Enter the user credentials to access the Web interface:

Username
1
accepts alphanumeric and special characters (e.g., underscore “_” and period “.”).

Password
2 accepts alphanumeric values and special characters (except “&”).Configure the Key Code
sequence to be used by the Local User for deactivation of the corresponding Auxiliary Output.

Confirm password requires you to type the password again for reconfirmation.
2. Check/uncheck the check box to Enable SSH access to the communications module.
3. Enter Username and Password to configure/modify Authentication for SSH user.
4. Click Apply to save settings.
1 The maximum number of characters in username is 30.
2 The maximum number of characters in password is 30.
2
5
1
5
3
5