Webs-cm-2, webs-pa-1 and webs-pa-2, Configuration and operation manual – Talkaphone WEBS-PA-2IP Outdoor Area WEBS Paging Unit User Manual
Page 24
WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
Configuration and Operation Manual
Page 24 of 53
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.7.6. Firmware Upgrade
The Firmware Upgrade page is used to update communications module to new firmware releases.
Login → Maintenance → Firmware Upgrade
Figure 28 Firmware Upgrade
To upgrade the firmware:
1.
Select either the FTP or HTTP protocol to download the firmware image.
2.
Enter the Server IP Address, Username
3
, and Password
4
for authentication. If the username and
password is preferred to be retained for a future upgrade, select the Save Username and Password
check box.
3.
In the Filename box, enter the filename with its complete path. The filename is generally in the format of
(EVP_A_B_C_D). This filename needs to be prefixed with directory relative to the HTTP or FTP root
directory. For example, /tftpboot/EVP_images/EVP_1_0_0_0). Consult the Administrator for FTP/HTTP
settings.
4.
Select the Upgrade check box.
5.
Click Apply. One of the following progress messages is displayed:
3
The maximum number of characters in username is 30.
4
The maximum number of characters in password is 30.
1
2
3
4
5