Webs-cm-2, webs-pa-1 and webs-pa-2, Configuration and operation manual – Talkaphone WEBS-PA-2IP Outdoor Area WEBS Paging Unit User Manual
Page 21
WEBS-CM-2, WEBS-PA-1 and WEBS-PA-2
Configuration and Operation Manual
Page 21 of 53
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected]• www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.7.3. Logging
Log messages generated by the communications module
can be captured for review. Enabling the “DEBUG”
option may degrade the communications module
’s performance. It is recommended to not use this option
unless required.
Login → Maintenance → Logging
Figure 25 Logging
To configure logging over the network:
1.
Select the Network option. This option enables Logging Server fields.
2.
Enter the Logging Server IP Address and the Logging Server Port.
3.
Select the log levels for different modules from the drop-down menu.
4.
Click Apply to save the settings.
Note To disable logging, select Nowhere (Disable)
Note To download and save the log file on the computer, click the Download link.
Note A maximum of 500 KB of logging data can be collected. On exceeding this limit, the older 250 KB of
logging data are purged from the log file.
1
2
3
4