Acoustica Mixcraft 7 - Manual (Page 158)

152
CHECK ALL/CHECK NONE
Check All/Check None lets you rapidly show or hide all mixer channels. Chekov, on the
other hand, is that guy on Star Trek.
SEND CHANNEL SELECTOR
The Send Channel selector chooses the active send channel knob displayed in the
Mixer channels. See the sidebar You Send Me… Send Knob Display In The Mixer.
MIXER CHANNEL STRIP CONTROLS
Below is a summary of all Mixer channel strip functions. Depending on the type
of track, the channel strip may not contain all controls shown below.
Notes Button
Selects the destination routing if the project contains
SubMix or Output Bus tracks. If no SubMix or Output Bus
tracks are present in the current project, track output defaults
to Main Mix and the Output flip menu is not displayed.
This tiny fader icon indicates the channel is active
for the current fader bank. This display is relevant
only when using a hardware fader controller.
Adjusts the amount of signal routed to the selected
Send Channel/Track. Only displayed if project has
one or more Send Tracks.
Opens the effect dialog for each track. If the track currently
has effects, the FX button turns green. Hovering over the
FX button displays the currently loaded effects.
Click to select and change Virtual Instruments.
(Virtual Instrument tracks only)
Arms the track for recording.