Acoustica Mixcraft 7 - Manual (Page 84)

78
The Copy Selection To command exports the currently highlighted audio wave
region to one of the following:
 Copy Selection To> Performance Panel
Places the selected region in the highlighted cell of the Performance Panel.
If no cell is currently selected, the sample will be placed at the first open location.
 Copy Selection To> Alpha Sampler
A new instrument track with an Alpha Sampler is created, and the selected
region will be loaded into Alpha Sampler.
 Copy Selection To> Omni Sampler
If there are no instances of Omni Sampler in the current project, selecting
Copy Selection To> Omni Sampler>New opens a new instrument track with
an Omni Sampler, and the sample is placed on the C4 sample pad. If Mixcraft
detects an existing Omni Sampler, this is displayed when Copy Selection To>
Omni Sampler is displayed. At this point you can export the audio region to an
existing Omni Sampler, or select New to create a new Omni Sampler instance on
a new track. Samples exported to an existing Omni Sampler instance will be
loaded into the first open cell above C4.
 Copy Selection To> Track
The selected region is imported to a track in the Main Clip Grid. The region is
placed at the current playhead location on the current audio track.
If the currently selected track isn't an audio track, the region is placed on the
first audio track. (Be careful, the region can potentially land beneath existing
audio - you won’t see it unless you slide the existing audio up or down.)