Acoustica Mixcraft 7 - Manual (Page 54)

48
Automation data may be freely copied between tracks, and even to different parameter
lanes. You can also copy multiple automation lanes or automation lanes and clips
simultaneously. The only limitation is that Mixcraft will only copy automation data
to visible lanes, e.g., if volume and pan lanes are copied to track with only a volume
lane visible, only the volume controller data will be copied. This is done to prevent
automation data from copying to an “invisible” location and potentially causing
confusion.
ADDITIONAL AUTOMATION PARAMETERS
Right-click in the track automation header to display additional parameters.
 Clear
Deletes automation data in the currently selected lane.
 Invert
Reverses the positions of automation data in the currently selected lane.
 Boost
Raises automation data value in the selected lane by 5%, 10%, 25%, or 50%.