Acoustica Mixcraft 7 - Manual (Page 316)

310
 Click on the command to learn. Command categories can be chosen using the
Category menu on the left side.
 Move the knob, button, slider or push a key on your MIDI keyboard/controller that
you wish to trigger the command.
 If you wish to learn another command, select it.
Alternatively, the Mixcraft interface will highlight buttons and sliders in purple. Simply
click on a button or control, then move the MIDI knob to assign it.
Once you’ve finished assigning controllers, click the Stop Learning button.
(Incidentally, this disproves the theory that you're never too old to stop learning.)
Fields Description
Command This is the command being assigned or mapped
Type Can be a CC or note-on message
Val The number of the CC or note-on
Ch# MIDI channel of controller
Any, > 63 or
< 64 The data field for the CC. Select a number from 1-127 or Any. (If
the Type field is Note down, choose from Any, > 63 or < 64. If Any
is chosen, then the command will be executed if the velocity is any
value. Otherwise, if >63 is chosen, a note down event with a velocity
greater than 63 will trigger the command.)
X Removes the current controller assignment