Acoustica Mixcraft 7 - Manual (Page 227)

221
The icons to the right of the Effects Chain drop-down menu perform the following
operations:
 Save A New Preset
Saves the current Effects Chain setup to a new preset. You’ll be prompted to
enter a preset name. The presets will then appear in the Effects Chain presets.
 Remove A Selected Preset
Permanently removes the currently selected preset. Careful with this guy! (You’ll
get an, “Are you sure?” prompt.)
 New Preset
This clears all current effects if you’d like to start with a clean slate.
MASTER EFFECTS
This is the effect insert on the Main Mix bus. Use this for adding master effects to be
applied to the entire mix such as bus compression, EQ, volume maximizers, etc.
Master Effects can be edited either by clicking the FX button in the transport area.