Acoustica Mixcraft 7 - Manual (Page 331)

325
These settings affect how the mouse wheel controls zooming and scrolling. Choose
combinations to custom configure the mouse wheel behavior.
The default setting is:
Mouse wheel = Zoom
CTRL + Mouse wheel = Horizontal Scroll
SHIFT + Mouse wheel = Vertical Scroll
PROJECT
AUTHOR
The default author will be filled into each new project's author information.
COPYRIGHT
The default copyright information will be filled into each new project's copyright
information.
CHANGE PROJECT TEMPO AND KEY TO MATCH FIRST SOUND
When adding loops or sounds with a known key or tempo, the software will change
the master tempo and/or key so that it sounds good. For example, if a sound was
normally at 68 bpm and you tried to play it at 120 bpm, it would sound terrible. Time
stretching works best when the tempos are no more than 10 to 30% different. This
option conveniently sets the tempo or key of the project to match the sound's tempo or
key.
ASK TO CHANGE PROJECT TEMPO AND KEY ON FIRST SOUND
This option will cause the software to prompt you to see if you want to change the
tempo or key for the Change Project Tempo And Key To Match First Sound option
above.
CREATE BACKUP FILE WHENEVER PROJECT IS SAVED
Every time you save, Mixcraft creates a backup file located in the project folder in a sub
folder called backup. MX7 backup file’s contain the date and time they are saved.
RECORDING
DEFAULT PROJECT FOLDER
The default project folder is where recordings and other important files are placed.
Click Browse... to choose a new default project folder location.