Acoustica Mixcraft 7 User Manual
Page 343
337
Touch Mode
When used with a control surface with touch-sensitive faders Touch Mode
overwrites automation data only when the fader is being touched. When used
with control surfaces with non touch-sensitive faders, recording of automation
initiates only after Mixcraft detects a fader has been moved. From this point on,
automation writing behaves the same as Overwrite Mode, overwriting as it goes
until Mixcraft is stopped.
TRACK MENU
ADD TRACK
Adds a new Audio Track (CTRL+G),Virtual Instrument Track (CTRL+E), Video Track,
Send Track, SubMix Track or Output Bus Track to the end of the project.
INSERT TRACK
Inserts a new Audio Track (CTRL+G),Virtual Instrument Track (CTRL+E), Video Track,
Send Track, SubMix Track or Output Bus Track before the currently selected track.
DELETE TRACK (CTRL+SHIFT+D)
This deletes the currently selected track.
SHOW MASTER TRACK
Click to show or hide the Master Track.
PROPERTIES
These submenus contain numerous track options.
Mute (CTRL+M)
Mutes or unmutes the selected track. A checkmark indicates that the track is
muted.
Solo (CTRL+L)
Solos or un-solos the selected track. A checkmark indicates the track is soloed.
Set Volume
Sets the volume for the selected track to either an exact amount or from 20% to
200%.
Set Pan
Sets the pan position of the selected track. If the clip on the track is a stereo file,
pan will act as a left/right balance control.
Track Color
Selects a color for the track and its clips.