Acoustica Mixcraft 7 - Manual (Page 269)

263
After selecting an instrument, the following parameters can be set:
ADDING EFFECTS TO INSTRUMENT PRESETS
To add effects to Instrument Presets, click <Select An Effect>.
Once an effect is chosen, an effects preset can be selected from the from the Preset
column. To customize effects settings, click the effects Edit button.
Parameter Description
Preset Selects a preset or patch from individual instruments.
Edit
If the synthesizer has an editable user interface, click
the Edit button to view and adjust its parameters.
Volume Click on the Vol column and type in a value.
Pan
Click on the Pan column and type in a value from
-100% to 100%.
Range
The range of MIDI notes the synthesizer responds
to. Click and select a range of notes from the pop-up
keyboard. The synthesizer will respond only to notes
in the specified range.
Transpose
Type in a transposition value for this synthesizer. For
example, if transpose is set to 12, playing C4 will
actually sound C5.
Velocity
Type in a velocity range the synthesizer will respond
to including a low and high note limit, e.g.1-
127). Make sure to include a dash so the software
understands the range. For example, if you wanted
it to respond to velocities from 120 to 127, you
would type in 120-127.
Config
If the virtual instrument supports multiple output
channels, click the Config... button to configure
which output channels to use.