Aviom Pro64 Network Manager - Manual (Page 127)

118 P
ro
64 N
etwork
M
aNager
U
ser
g
Uide
Channel Settings Menu – Output Devices
Output Module Settings (AllFrame, 6416dio, and 6416o)
Activate Output
Channel
Makes the selected output channel active and lights its yellow
‘Active’ LED. (Not available on ASI or 6416Y2 cards)
Activate All Output
Channels
Sets all output channels of the current device to active and lights
their yellow ‘Active’ LEDs. (Not available on ASI or 6416Y2 cards)
Deactivate Output
Channel
Deactivates the selected output channel and turns off its yellow
‘Active’ LED. (Not available on ASI or 6416Y2 cards)
Deactivate All Output
Channels
Deactivates all output channels on the device and turns off all
yellow ‘Active’ LEDs. (Not available on ASI or 6416Y2 cards)
Clear All Output Matrix
Slot Assignments
Resets an output device to the default routings.
Presets Menu
The Presets menu is available for I/O devices only (AllFrame, ASI, 6416i, 6416m, 6416Y2, 6416dio, and 6416o)
and contains the following commands:
Save Device Preset Saves the current state of the Pro64 I/O device as a preset in the
selected location (1‑16); also used when updating existing presets.
Recall Device Preset Recalls the currently selected preset for the device.
Clear Device Preset Clears the currently selected preset and removes it from disk.
There is no undo.
Clear All Device Presets Clears all 16 presets and removes them from disk. There is no undo.