Aviom Pro64 Network Manager - Manual (Page 97)

88 P
ro
64 N
etwork
M
aNager
U
ser
g
Uide
6416Y2 Card Stereo Links
Pro64 Network Manager adds simplified programming for input modules capable of using stereo links.
However, the 6416Y2 card uses physical DIP switches on its front panel for activating a stereo link for a
channel pair. These switches are not software controllable.
In the 6416Y2 card’s Device Window there are no software stereo link commands available (unlike other
Pro64 input devices), but any active stereo links will be displayed. Changes to 6416Y2 channel pairs can be
made at any time using the DIP switches on the front face of the card; the on‑screen display will update
immediately.
Stereo links are active on channels 3-4 and11-12.
All channel activation rules still apply for stereo links on 6416Y2 cards—channels to be stereo linked must
be an odd‑even pair and both channels must be active in the network before a stereo link can be used.
The Status icon will be yellow if a 6416Y2 card is configured to use the settings from its internal DIP switches
instead of those coming from the software; a card in this state cannot be edited or controlled. This status
icon mirrors the one seen in the Network Overview.