Aviom Pro64 Network Manager - Manual (Page 137)

128 P
ro
64 N
etwork
M
aNager
U
ser
g
Uide
Use the commands in the Scene menu to delete Scenes from a project.
To clear all the Scenes in a project use the c
leAr
A
ll
s
ceNes command found in the Scene menu. In the
dialog box that appears click Y
es
to permanently erase all Scene files from disk and remove them from the
project or click N
o
to return to the Scene Manager window without deleting any of the Scene files. There is
no undo possible when deleting all Scenes. Save the project after editing and clearing Scenes.
Scene Compatibility
To be used online with a Pro64 Network Manager project, a Scene needs to contain information that is
compatible with the exact quantity and type of all Pro64 devices in the network. Changing the number
of Pro64 devices in the network, for example from two 6416m to three 6416m mic preamps, will cause
any Scenes created when only two 6416m preamps were in the network to be invalid when three 6416m
preamps are connected. AllFrame I/O cards must be in the same slot (A‑F) as when the Scene was saved in
order to be valid.
Working Online
When a project is loaded while working online, every Scene in the project file is checked for compatibility.
If the Scene is compatible it is marked in the Scene Valid column of the Scene Manager window with a
green OK icon. This icon indicates that the Scene can be loaded into the current hardware configuration.
If a Scene is found to be incompatible it will be marked with a red exclamation point icon ( ! ) in the Scene
Valid column. Scenes can become invalid for a number of reasons including a change in the makeup of
the network (a Pro64 device is not powered up, for example), a Scene being renamed or moved from the
project folder, or a cable problem causing A‑Net communication between devices to change or become
intermittent.
Working Offline
When working offline, Scenes can be edited as needed; new Scenes can also be created without requiring
a network connection. Scenes are only checked for compatibility when the network transitions from
working offline to working online. As happens when a project is opened while already online, all valid
Scenes are marked OK and any invalid Scenes will show ( ! ) in the Scene Valid column.