Aviom Pro64 Network Manager - Manual (Page 50)

41 P
ro
64 N
etwork
M
aNager
U
ser
g
Uide
The Scene Manager window
You can choose to work using any combination of the project file, Scenes, and Device Presets. Once a
project has been created, all information about the current network is stored when the project is saved
using the s
Ave
p
roject
command in the File menu of the main workspace.
Project Compatibility
Any projects saved to disk are checked for compatibility with the current network when they are opened
while working online or when you attempt to transition from working offline to online.
It is important to remember that the quantity and type of the Pro64 devices in the network as well as
the specific Pro64 devices set as Control Master and Clock Master are directly tied to the project when
it is created. A saved project that has any of the above‑described properties different from the current
network can be opened offline for editing but cannot be loaded into the online Pro64 network until the
networks match. In addition, remember that an AllFrame device’s specific card configuration including the
installed location and quantities of each card type is tied to the project.
The makeup of the network could be different for a number of reasons including devices not being
powered up, the addition/deletion of Pro64 devices, damaged or missing cables, etc.
P N
ote
: AllFrame devices are user configurable and as such must contain the exact complement of I/O
cards which must be installed in the same card slots within the F6 in order to remain compatible.