What’s new in version 3.0, New in version 3.0.2, What’s new in version 3 0 4 – Aviom Pro64 Network Manager User Manual

Page 13: New in version 3.0.3

Advertising
background image

4

P

ro

64 N

etwork

M

aNager

U

ser

g

Uide

What’s New in Version 3.0

If your system is already running Version 2 of Pro64 Network Manager, the Version 3 release introduces the

following new features and functionality:

Hardware support for the

C4dio card for the AllFrame—a firmware update to the

AllFrame F6 is required to allow the cards to be recognized. See page 74.

AllFrame devices now support

external clocks (requires at least one C4dio card to be

installed).

External sync via

Word Clock and AES3 clocks are supported when a C4dio card is

installed in an AllFrame.

Optional

sample rate converters (SRC) are available when a C4dio card is installed in

an AllFrame F6 allowing external devices with digital outputs such as CD players to be

connected to a Pro64 network. See page 75.

The AllFrame Device Window has new features that support C4dio cards installed

in the F6 including Sample Rate Converters on/off switches and Audio Clock Source

menu selection options.

Standby Mode is now supported for AllFrame devices in the network. See page 77.

Three methods of Standby for AllFrame devices are supported—software based

using the Device Window in Pro64 Network Manager, from the AllFrame’s dedicated

front panel Standby momentary switch, and hardware‑based using a contact closure

connected to the Euroblock connector on the top panel of the AllFrame. See page 77.

Use the Firmware Update utility (found in the Tools menu of the main workspace) to update the firmware

in your Pro64 devices to take advantage of the new hardware‑related features.

New in Version 3.0.3

In addition to the Version 3.0 features described above, Version 3.0.2 is a maintenance update that

introduces the following:

Device Windows will no longer show multiple warning messages if resource conflicts

exist when attempting to activate multiple Slots using the Activate All Input Channels

command found in the Channel Settings menu. See page 68.

A new Channel Activation Warning window has been added.

Network Overview sorting issues have been resolved.

Advertising