BUCHI NIRFlex N-500 - Manual (Page 48)

5 Putting into operation
48 NIRFlex N-500 Operation Manual, Version F
LAN setup of the PC
To establish communication, set up the IP of the connected PC in accordance to the local network
environment or via direct link as listed below.
IP-configuration of the connected PC (direct link):
Static IP-address 192.168.1.2 •
Subnet mask 255.255.255.0 •
5 .4 .2 Network integration
There are various possibilities how the NIRFlex N-500 can be installed and used.
In the following, two examples are given:
All data on one PC via direct link
The PC with the NIRWare database is directly connected to the NIRFlex N-500.
All data remain on that specific PC.
NIRWare database on central company server via indirect link
The NIRWare database runs on a central company server. The Administrator has access to the data-
base on that server. The data measured by the Operator are collected on the database of the central
company server.
NOTE
Other setups i.e. with the NIRFlex N-500 directly attached to a local network can also be realized.