BUCHI NIRCal - Manual (Page 23)

Introduction
NIRCal 5.5 Manual, Version A 23

Calibration Inputs are the measured spectra with their properties and with the reference
values together with the calibration data selection.
Outputs are the calibration for the properties together with the validation for
the validation set (V-Set) spectra or the result of Cross Validation (CV).

Application Inputs are the calibration and a measured spectrum.
Outputs are the predicted property value(s), calibration limits or hitlist; spectral
residuals.
1.2.8 Calibrations Overview
All calibrations calculated in this project can be seen here.
Items marked with a yellow pen can be edited by pressing F2 or a double click.
New (active) calibration, not yet stored in the database
Stored calibration not in “Edit” mode (availability for “Edit” mode depends on Lifecycle status)
Stored calibration in “Edit” mode