BUCHI NIRCal - Manual (Page 80)

NIRCal 5.5 Software Manual
80 NIRCal 5.5 Manual, Version A
In the project, the selected wavenumber as data points and range are shown (here: 1376 data points
in the range of 4'500-10'000 cm
-1
).
Selecting Calibration Wavelengths using Graphics
To review and select the suitable calibration wavelength range, several graphics can be used.
An example is shown with the pretreated spectra, but it can also be done in the original spectra,
loading or property wavelength regression graphic in the same way.
Open the pretreated spectra in Menubar: Graphics / Spectra / Pretreated.
When the graphic is opened, press the right mouse button and choose:Options / Mouse X-Axis
Select.