Hardy HI 1746-WS - Manual (Page 24)

HI 1746-WS WEIGH SCALE MODULE
3-4
FIG. 3-3 POSITIONING THE MODULE FOR
INSTALLATION
Step 2. Gently slide the module into the SLC or
Remote Chassis.
Step 3. Slide the digital board between the PCB
Guides on the top plate and bottom plate
of the chassis to line up the module con-
nector with the backplane connector.
Step 4. When the module connector is touching
the backplane connector, firmly but care-
fully push toward the chassis until the pins
are plugged in and the Processor Releases
(both top and bottom) are snapped into
place. (See Fig. 3-4 & 3-5)
Step 5. The installation is complete.