Hardy HI 1746-WS - Manual (Page 30)

HI 1746-WS WEIGH SCALE MODULE
3-10
Installing the Hardy
Configuration
Software (Optional) Contact your local Hardy Representative or Hardy
Sales Department for information about how to pur-
chase the Hardy WS 100 Configuration Software for
Windows.
Step 1. The SETUP program copies the required
files to your hard disk.
Step 2. Run Windows NT/95/98 and insert the
Configuration Installation System Disk
into the 3.5” floppy drive.
Step 3. Click on START.
Step 4. Click on Run.
Step 5. In the Run field type the command:
a:setup. If your floppy drive is drive b
enter: b:setup.
Step 6. Press the Enter key.
Step 7. You can also use the Add/Remove Func-
tion in the Control Panel dialogue box.
a. Click on Start
b. Move the cursor to Settings.
c. Select Control Panel.
d. Double click on the Add/Remove Pro-
grams icon.
e. Click on the Install button.
Step 8. The SETUP program will lead you
through the installation process.
NOTE: HI WS100 Configuration Software is an option. For
Pricing and Information for this product contact your
local Hardy Representative.