C2 led, C2 calibration using ladder logic, N9:0 - 24 – Hardy HI 1746-WS User Manual
Page 66: N9:50, N9:51, N10:0 - 2, C2 led -6, C2 calibration using ladder logic -6, N9:0 - 24 -6 n9:50 -6 n9:51 -6 n10:0 - 2 -6
Advertising
HI 1746-WS WEIGH SCALE MODULE
5-6
FIG. 5-4 C2 LED
C2 LED
Green Off/On
Button Calibration was successful
Red then Green
C2 Cal failed, scale in motion.
C2 Calibration
Using Ladder
Logic
Step 1.
Check to be sure that the parameters have
been setup for your weighing process. (See
Chapter 4, Setup)
Step 2.
We have provided a Ladder Logic (for
both the local and remote mode of opera-
tion) example explaining how to perform
the C2 Calibration.
Data Locations Used
for Ladder Logic
Examples (For Local
Mode of Operation
Only)
B3 - All the B3 locations are used as status bits for
program control.
N9:0 - 24
Input Data (READWEIGHT Example)
N9:50
Weight Multiplier
N9:51
ROC Multiplier
N10:0 - 2
Input Read from M1 File. (Sequence number, com-
mand number and status)
Advertising