Hardy HI 1746-WS - Manual (Page 90)

HI 1756-WS MANUAL
R
Rate of Change (ROC) 1-6
Read C2 Serial Number Command (READC2SERIALNUM) 4-14
Read Data 6-1
Reading from the 32 Word Logical I and logical M1 files 4-8
READWEIGHT Ladder Logic Example 6-6
Relays 3-6
Reload Non-Volatile (RELOADNONVOLATILE) 4-11
Remote Mode of Operation 4-1, 4-3, 4-5
Removing the Module from the SLC 500 or Remote Chassis 3-5
Resolution 2-1
Return to Zero Test 1-5
RS Logix 500
©
1-1
RS-232-C 1-3
Run/Fault LED 4-2
S
Sequence Number (SEQUENCENUM) 4-5
Set Parameters Command (SETPARAM) 4-14
Set Point (1 & 2) Out 2-2
Set Point TTL Outputs 1-6
SETPARAM - GETPARAM Command and Non Volatile Memory 4-21
SETPARAMS Local Mode of Operation 4-23
SETPARAMS Remote Mode of Operation 4-24
Setting Parameters Ladder Logic Explanation 4-22
Setting the Auto Zero Tolerance Value 4-29
Setting the Jumper for Local or Remote Mode of Operation 3-2
Setting the Motion Tolerance Value 4-28
Setting the Number of Readings Averages 4-29
Setting The Process Weighing Parameters 4-20
Setting the Span Weight Value 4-29
Setting the Unit of Measure 4-28
Setting the WAVERSAVER Value 4-29
Setting the Zero Tolerance Value 4-29
SETUP Program 3-10
SLC 500 AI Series 1-3
SLC Chassis 4-1