Hardy HI 1746-WS - Manual (Page 86)

HI 1756-WS MANUAL
Bits 15-14 set to “01” 4-9
Bits 15-14 set to “10” 4-9
Bits 15-14 set to “11” 4-9
Bits 8-13 4-7
Blending 1-3
Block Transfer, Read 6-1
Block Transfer, Read Example (For Local Mode Only) (READ-
WEIGHT) 6-5
Block Transfer, Read Ladder Logic Example for Remote Mode Opera-
tion 6-6
Block Transfer, Write 6-7
Block Transfer, Write Ladder Logic Example for Remote Mode Opera-
tion 6-9
C
C2 Cal Command (C2CALCMD) 4-13
C2 Calibration 5-4
C2 Calibration Input 2-2
C2 Calibration Ladder Logic Example (For Local Mode of Operation
Only) 5-8
C2 Calibration Ladder Logic Example (For Remote Mode of Operation
Only) 5-11
C2 Calibration Ladder Logic Explanation 5-7
C2 Calibration Output 2-2
C2 Calibration Using Ladder Logic 5-6
C2 LED 4-2, 5-6
C2
®
1-1
Cable lengths 2-2
Cal High Command (CALHIGHCMD) 4-13
Cal Low Command (CALLOWCMD) 4-12
Calibration Setup Procedures 4-28
Case Dimensions 2-3
Comm Setup Section of the HI WS100 Configuration Software Manual
4-18
Comm. LED 4-2
Command Word 4-8, 4-9
Command Word Encoding 4-7