Toshiba LF600F - Manual (Page 47)

TOSHIBA i6,F|8iA0i8,6,9i
7.3.2 Setting and Calibration
Process as follows to select the desired items, to check or change the item setting value.
“Key operation” indicates the key to be pressed.
When you are incrementing the numeric counter by pressing the TUPI key or when you are
incrementing or decrementing the numeric and alphabet counter by pressing the TUPI kev/FOWNI
key, you can perform continuous operation bv holding down the relevant key (Holding down the kev
causes the numeric or alphabetic character count to be increased/decreased).
-
46
-