3 meter size, Toshiba – Toshiba LF600F User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
,6,F,8,A0,8,6i9,
8.2.3 Meter Size
Proceed as follows to check or change the meter size of the detector.
Key operation
Display example
Description
A:
Select “METER SIZE" in the configuration item
MEAS MODE
EX CURRENT
->METERSIZE
EX FREQ
FLOW DIRECTN
PASSWORD
ADDRSET
[SELl [ENT]
selection screen.
STEP1
A2:
The currently set meter size (50mm in this example) is
METER SIZE
50
displayed.
[ENT]
mm
[EXT] [ENT]
Then press the [ENT] key.
* Pressing the [EXT] key returns you to the menu screen.
STEP2
A2:
The switch name display at the bottom changes.
METER SIZE
(Three keys [UP], [DWN] and [SET] are displayed)
At the same time, the cursor appears.
[ENT]
mm
[U P] [DWN] [SET]
Then press either [UP] or [DWN],
STEPS
A2:
You can continue to change the setting value.
METER SIZE
Pressing [UP] or [DWN] key changes the selection item.
[UP]: Selection item count increases
[UP]/[DWN]
mm
[U P] [DWN] [SET]
[DWN]: Selection item count decreases
STEP4
A2:
Repeat this operation to change the setting value to
METER SIZE
150mm.
[IS
When the desired selection item appears, press the [SET]
[UP]/[DWN]
mm
[U PI [DWN] [SET]
key to temporarily set the item.
STEPS
A2:
Pressing the [SET] key displays a message asking you to
METER SIZE
confirm whether the setting is OK or not.
150
If OK, press the [SET] key. If you need to redo the setting.
[SET]
mm
OK?^
[NO] [SET]____________
press the [NO] key.
-
57
-