Comtrol eCos - Manual (Page 159)

fis load
Name
fis load — Load flash image
Synopsis
fis load [-b load address ] [-c ] [-d ] [ name ]
Arguments
Name Type Description Default
-b Number Address the image should
be loaded to. Executable
images normally load at the
location to which the file
was linked. This option
allows the image to be
loaded to a specific
memory location, possibly
overriding any assumed
location. If not specified, the address
associated with the image
in the FIS directory will be
used.
-c Compute and print the
checksum of the image
data after it has been
loaded into memory.
-d Decompress gzipped image
while copying it from flash
to RAM.
name String The name of the file, as
shown in the FIS directory.
Description
This command is used to transfer an image from flash memory to RAM.
Once the image has been loaded, it may be executed using the go command.
55