Fis erase, Name, Synopsis – Comtrol eCos User Manual
Page 167: Arguments, Description, Examples
Advertising
fis erase
Name
fis erase
— Erase flash area
Synopsis
fis erase {-f
flash_address
} {-l
length
}
Arguments
Name
Type
Description
Default
flash_address
Number
Address of area to be
erased.
length
Number
Length of area to be erased.
Description
This command is used to erase a portion of flash memory forcibly. There is no cross-checking to ensure that the
area being erased does not correspond to an existing image.
Examples
Erase an area of the flash
RedBoot> fis erase -f 0xa0040000 -l 0x20000
... Erase from 0xa0040000-0xa0060000: .
63
Advertising