Comtrol ES7528 - Manual (Page 116)

116 - IP Filter RocketLinx ES7528 User Guide: 2000509 Rev. C
Configuration Using the Web Interface
IP Filter
Click IP Filter and type ID/Name to configure security using IP addresses. Click Reload to reload setting and
Remove to remove one of the entries.
IP Filter Set
ID/Name
You can enter an ID for the IP access list or you can enter an ACL
name ID/Name field. If you enter an ACL name, the entry uses IP
Extended mode and supports IP Standard and IP Extended.
IP Standard Access
List This type of ACL allows you to define filter rules according to the
source IP address.
IP Extended Access
List
This type of ACL allows you to define filter rules according to the
source IP address, destination IP address, Source TCP/UDP port,
destination TCP/UDP port and ICMP type and code.