Comtrol ES7528 - Manual (Page 71)

RocketLinx ES7528 User Guide: 2000509 Rev. C Storm Control - 71
Configuration Using the Web Interface
Storm Control
The Storm Control is similar to Rate Control. Rate Control filters all the traffic over the threshold you input
by the user interface. Storm Control allows you to define the rate for specific Packet Types.
Storm Control Page
Broadcast
To enable or disable broadcast storm control on the
corresponding port.
DLF
To enable or disable destination lookup failure storm
control on this port.
Multicast To enable or disable multicast storm control on this port.
Rate
Broadcast rate limit range from 0 to 262143 packet/sec
(fast Ethernet maximum is 148810 packet/sec).
Rate (packet/
sec)
These columns allow you to manually assign the limit
rate of the port. The unit is packets per second. The limit
range is from 1 to 262143 packet/sec, zero means no
limit. The maximum available value of Fast Ethernet
interface is 148810, this is the maximum packet number
of the 100M throughput.
Apply
Click Apply to apply the settings. It may take some time
and the web user interface may become slow, this is
normal condition.
Note: You must Save the settings ( Page 136 ), if you want
to maintain these settings if the ES7528 is
powered off.