Comtrol ES7528 - Manual (Page 136)

136 - Save to Flash RocketLinx ES7528 User Guide: 2000509 Rev. C
Configuration Using the Web Interface
Save to Flash
The Save Configuration page saves any changes to the configuration to the flash.
If the switch loses power before clicking Save Configuration causes loss of the new settings. Applying changes
on web user interface pages do not save the changes to the flash.
After selecting Save Configuration, click Save to Flash to save your new configuration.
Optionally, you can use the CLI, see Saving to Flash (CLI) on Page 198.
Logout
Click the Logout option in the web user interface to manually logout the web connection.
If you have saved your changes, click Yes to logout, No to remain the web user interface.
If you did not save your changes, you can save your changes when you logout.