Comtrol ES7528 User Manual
Page 139
Advertising
RocketLinx ES7528 User Guide: 2000509 Rev. C
Using the Serial Console - 139
Configuration Using the Command Line Interface (CLI)
5.
Type a Host Name to represent the COM port.
6.
Click Serial on the left side under Category.
7.
Configure the serial line with the following
characteristics.
8.
Click Session under Category in the menu.
9.
Type an appropriate Saved Session name and click
Save.
10. Click Open.
Serial Settings
Value
Baud Rate
9600
Data bits
8
Parity
None
Stop Bit
1
Flow Control
None
Advertising