Comtrol ES7528 - Manual (Page 163)

RocketLinx ES7528 User Guide: 2000509 Rev. C Power over Ethernet (CLI) - 163
Configuration Using the Command Line Interface (CLI)
Set Control Mode on Port/Schedule
Set PoE Port to
User Mode
Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe control-mode
schedule Schedule mode
user User mode
Switch(config-if)# poe control-mode user
Schedule
Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe control-mode
schedule Schedule mode
user User mode
Switch(config-if)# poe control-mode schedule
Enable/Disable PoE Function in User Mode
Enable
Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe user
disable Disables the poe for the port
enable Enables the poe for the port
Switch(config-if)# poe user enable
Disable Switch(config-if)# poe user disable
Port Type String
Set
Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe type
TYPE Type string, maximum 20 characters
Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe type IPCam-1
Set Port Budget
Set Power
Consumption
(Max) to 12W Switch> enable
Switch# config term
Switch(config)# interface fa1
Switch(config-if)# poe budget
[POWER] 0.4 - 32 Watts
warning Warning water level
Switch(config-if)# poe budget 12